RTL8191SEvB Wireless LAN Controller (continued)

*-network
description: Wireless interface
product: RTL8191SEvB Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:07:00.0
logical name: wlan0
version: 10
serial: 1c:65:9d:ba:25:47
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 ip=192.168.0.17 latency=0 link=yes multicast=yes wireless=802.11bg
resources: irq:17 ioport:2000(size=256) memory:d1100000-d1103fff

Looking at the log from dmesg I can see this look working:

[ 2028.969908] rtllib_crypt: registered algorithm 'NULL'
[ 2028.969911] rtllib_crypt: registered algorithm 'TKIP'
[ 2028.969912] rtllib_crypt: registered algorithm 'CCMP'
[ 2028.969913] rtllib_crypt: registered algorithm 'WEP'
[ 2028.969914]
[ 2028.969915] Linux kernel driver for RTL8192 based WLAN cards
[ 2028.969916] Copyright (c) 2007-2008, Realsil Wlan Driver
[ 2028.969957] rtl819xSE 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2028.969963] rtl819xSE 0000:07:00.0: setting latency timer to 64
[ 2028.970100] Memory mapped space start: 0xd1100000
[ 2028.976097] GetPciBusInfo(): Find Device(10EC:8172) bus=7 dev=0, func=0
[ 2028.977088] GetPciBridegInfo : Find Device(8086:3B44) bus=0 dev=28, func=1
[ 2028.977089] Pci Bridge Vendor is found index: 0
[ 2028.977090] Pci Bridge Vendor is 8086
[ 2028.982411] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
[ 2029.065603] rtl819xSE 0000:07:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
[ 2029.213505] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2029.213512] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2029.213516] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2029.214753] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2029.432219] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2029.432226] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2029.432230] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2049.903684] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2049.903691] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2049.903695] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2079.890248] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2079.890255] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2079.890260] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2119.960961] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2119.960965] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2119.960967] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2173.776027] lo: Disabled Privacy Extensions
[ 2231.078758] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2231.078762] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2231.078763] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2232.536122] Linking with networknamewifi,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[ 2232.536143] rtllib_associate_procedure_wq(), chan:6
[ 2232.536148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 2232.546108] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 2232.546189] Linking with networknamewifi,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[ 2232.546225] rtllib_associate_procedure_wq(), chan:6
[ 2232.546230] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 2232.556188] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[ 2232.561705] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 2232.567377] Associated successfully
[ 2232.567379] normal associate
[ 2232.567388] Using G rates:108
[ 2232.567389] Successfully associated, ht not enabled(0, 0)
[ 2232.567395] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 2232.569531] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2232.986229] RX: IEEE802.1X EAPOL frame!
[ 2232.994942] RX: IEEE802.1X EAPOL frame!
[ 2232.995027] alg name:CCMP
[ 2233.052391] padlock: VIA PadLock not detected.
[ 2233.064043] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 2233.064651] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 2233.120207] dm_check_edca_turbo():iot peer is unknown, bssid:12:2a:72:73:b0:00
[ 2233.974604] RX: IEEE802.1X EAPOL frame!
[ 2233.974747] alg name:TKIP
[ 2234.012111] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 2234.013102] set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
[ 2237.682630] DHCP pkt src port:68, dest port:67!!
[ 2237.704858] DHCP pkt src port:68, dest port:67!!
[ 2241.115880] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData

http://samiux.blogspot.com/2010/11/howto-rtl8191se-wireless-card-on.html

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=609784