Friday, July 30, 2010

Still struggling with cmake/git

  cd CMake
  git checkout master
  git pull
  git checkout -b fix-issue-9611
  cp ~/tmp/cmake-2.8.2/Modules/FindJNI.cmake Modules/FindJNI.cmake
  git add --  Modules/FindJNI.cmake
  git commit -m"BUG: 0009611 Fix Arch independent FindJNI.cmake on Linux to support Sun Java, OpenJDK, Kaffe and GCJ paths. Based on patch from debian"
  git checkout -b next origin/next
  git checkout next
  git pull
  git merge  fix-issue-9611
  git push
Counting objects: 15, done.
Delta compression using up to 16 threads.
Compressing objects: 100% (8/8), done.
Writing objects: 100% (8/8), 1.58 KiB, done.
Total 8 (delta 6), reused 0 (delta 0)
commit 6a3d7d46 has an invalid message:
  the first line must not be more than 78 characters
commit message is:
BUG: 0009611 Fix Arch independent FindJNI.cmake on Linux to support Sun Java, OpenJDK, Kaffe and GCJ paths. Based on patch from debian
error: hook declined to update refs/heads/next
 ! [remote rejected] next -> next (hook declined)
error: failed to push some refs to ''

Tuesday, July 27, 2010

Preparing bootable debian-installer CD for MacMini/PPC

Here is a follow up on my quest to get a proper bootable CD of debian-installer for my PPC MacMini.

$ wodim  -eject -v speed=2 -data -pad  ./debian-505-powerpc-netinst.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.Device was not specified. Trying to find an appropriate drive...
Looking for a CD-R drive to store 199.59 MiB...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVD+-RW GH30N   '
Revision       : 'A102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 126494 kB/s 718x CD 91x DVD
FIFO size      : 12582912 = 12288 KB
Track 01: data   199 MB         padsize:   30 KB
Total size:      229 MB (22:42.73) = 102205 sectors
Lout start:      229 MB (22:44/55) = 102205 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12508 (97:15/17)
  ATIP start of lead out: 359845 (79:59/70)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 257640
Speed set to 2822 KB/s
Starting to write CD/DVD at speed  16.0 in real TAO mode for single session.
Last chance to quit, starting real write in    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:  199 of  199 MB written (fifo 100%) [buf  91%]  16.8x.
Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 209281024/209311744 (102203 sectors).
Writing  time:   94.845s
Average write speed  14.4x.
Min drive buffer fill was 90%
Fixating time:   18.573s
wodim: fifo had 3297 puts and 3297 gets.
wodim: fifo was 0 times empty and 3069 times full, min fill was 95%.

Let's try checking the iso was burned ok:

$ cmp /dev/cdrom debian-505-powerpc-netinst.iso
cmp: EOF on debian-505-powerpc-netinst.iso

I followed instructions from:

Still no luck using:
- C reboot solution
- Option solution
- Command+Option+o+f solution

Friday, July 23, 2010

API Sanity Autotest

I just discover today a neet tool to detect API/ABI change in shared C/C++ libraries:

This is used at:

I think I need to compare that to the other one I had in mind: